Kodak ESP 1.2 User Manual page 23

Problem
For ESP 3.2
Printer —
Printer not
detected
(continued)
Printhead
carriage jam
www.kodak.com/go/aiosupport
Possible Solutions
■
If you are using a wireless connection, make sure that:
– the printer is connected to your wireless network.
To check:
a
On the printer, press
b
Touch
c
Touch View Network Configuration.
d
Make sure that the Active Connection Type is Wi-Fi,
and that the IP Address is not 0.0.0.0.
– your router is transmitting data.
– the firewall (excluding WINDOWS Firewall) is allowing
the services needed for your printer.
– For more information, go to
www.kodak.com/go/inkjetnetworking.
■
Open the access door and clear any obstructions.
■
Check that the printhead and ink cartridges are installed
correctly. (The printhead and ink cartridges are installed
correctly when you hear them click into place.)
.
, then touch Network Settings.
Troubleshooting
19