Kodak Pixpro SP1 User Manual page 20

Steps for installing the lens cover:
1. Hold the product with your left hand, and
pull the lens buckle with your finger to the
left end as illustrated in the photo, hold
the lens cover ring with your right hand.
2. When three alignment points are in a
straight line, buckle the lens cover to the
lens, and rotate against the OPEN arrow
direction.
3. When the notch of the lens cover ring
is aligned with the lens buckle, loose
your left hand from the lens buckle, and
remove your right hand from the lens
cover.
①
②
Please select appropriate lens cover
when taking videos and pictures,
otherwise it will affect the image effect.
When the product is exposed
to fluctuations in temperature,
condensation may form on the inside
surface of the lens cover. If this
happens, remove the lens cover, clean
it with a soft, dry, lint-free cloth, and
then reinstall the lens.
19