Advertisement
Quick Links
00972 INST0518-06
Main Unit
Thank You! We appreciate you for purchasing the new generation radio-controlled
wireless weather station and atomic clock. This instrument is designed and engineered
with state-of-the-art technology and components. It will provide these accurate and
reliable measurements: date, time, and indoor/outdoor temperatures and humidity levels.
1 CHECK PACKAGE CONTENTS
(1) Main Unit – 7.25" x 2.75" x 1.5"*
(1) Wireless Sensor – dimensions: 2.5" x 3.5" x 1"*
(1) 10'* wired low temperature adaptor
(2) 1" (2.5cm) screws with plastic anchors
(1) Instruction manual
2 READ
Please read this entire manual carefully before you set up the instrument and begin to
use it. In this way you can become familiar with the features of the weather station &
clock to get the most benefit from it.
Instruction Manual
Wireless Weather Station
& Atomic Clock
MODEL # 00972
Wireless Sensor
THERMO HYGRO
with low
temperature
adaptor
* dimensions approximate
1
Advertisement
Related Manuals for AcuRite 972
Summary of Contents for AcuRite 972
- Page 1 00972 INST0518-06 Instruction Manual Wireless Weather Station & Atomic Clock MODEL # 00972 Wireless Sensor Main Unit THERMO HYGRO with low temperature adaptor Thank You! We appreciate you for purchasing the new generation radio-controlled wireless weather station and atomic clock. This instrument is designed and engineered with state-of-the-art technology and components.
-
Page 2: Install Batteries
3 INSTALL BATTERIES Main Unit: Always install batteries into the main unit first. On the back of the unit, Main Unit remove the battery compartment cover. Insert 2 AA alkaline (or lithium – See NOTES BACK below) batteries. Replace the cover. Wireless Sensor: After batteries have been put into the main unit, remove the 4 screws to remove the back cover of the wireless sensor. - Page 3 MAIN UNIT FUNCTION BUTTONS Using the included LOW TEMPERATURE ADAPTOR The wireless sensor will operate normally down to -4 ºF. Below -4 ºF, the electronics may operate erratically or become non-functional until the temperature raises again. In case temperatures fall below -4ºF, bring the wireless sensor indoors and use the included low temperature adaptor by running the wire out through a soft seal opening such as a window or door.
- Page 4 6 UNDERSTAND WHAT THE BUTTONS 7 MAIN UNIT FEATURES Radio-controlled Clock : The unit starts synchronizing the clock after the 1st channel PRESS & HOLD BUTTON NAME PRESS & RELEASE FOR 3 SECONDS of the wireless sensor begins to send its information to the main unit. (This is called registration.) The built-in antenna receives the official time signal from the US choose channel 1,2, clears the current...
- Page 5 Moon Phase: 8 MULTIPLE WIRELESS SENSORS The moon phase will automatically display based on the calender date. The moon phase display will scroll from left to right, and pause for about 5 seconds to display the current The main unit supports up to three wireless sensors. Each additional wireless sensor moon phase.