Display Setup ......6 FCC Information ....14 Intelli-Time Clock ....7 Customer Support ....15 ® Set the Time, Date & Units ..7 Warranty......15 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits DISPLAY UNIT 9. Barometric Pressure Arrow icon indicates the direction 1. Outdoor Sensor Signal Strength the pressure is trending. 2. Current Outdoor Temperature 10. Low/High Humidity Records Arrow icon indicates the direction Lowest and highest indoor the temperature is trending. humidity recorded since midnight.
Features & Benefits BACK OF DISPLAY UNIT 5. Battery Compartment 6. Reset Button 1. All-Time Records Button Full reset to factory defaults. Press to access all-time high and low records. 7. Battery Compartment Cover 2. Adjust Up Button 8. Plug-in for Power Adapter for setup preferences.
2. Install or Replace Batteries 2. Insert 2 x AA batteries into AcuRite recommends high quality the battery compartment, as alkaline or lithium batteries for shown. Follow the polarity the best product performance.
Display Unit Setup Set the A-B-C Switch 2. Insert 3 x AA alkaline batteries into the battery compartment, Locate the A-B-C switch inside as shown. Follow the polarity the battery compartment. Set (+/–) diagram in the battery the A-B-C switch to A, B or C. compartment.
Intelli-Time Clock ® Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time. Set the Time, Date &...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
High & Low Records Today’s high and low records are displayed for indoor and outdoor temperature and humidity. Today’s records automatically clear at 12:00am midnight every day. To manually clear all of today’s LOW recorded values, press and hold the “...
(see page 8). temperature or humidity • Make sure both units are positioned away from moisture sources (see page 8). If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives Calibration Calibrate Temperature &...
3. Press the “ “ or “ “ buttons to calibrate the pressure higher or lower. 4. Press the “ ” button to confirm the calibration adjustment. Note: The “ ” icon will remain illuminated next to the calibrated value. After 20 seconds of inactivity, the display will save your adjustments and exit calibration mode.
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC Outdoor: 1% - 99% RH (relative humidity) HUMIDITY RANGE Indoor: 1% - 99% RH (relative humidity) 330 ft / 100 m depending on home construction materials WIRELESS RANGE 433 MHz OPERATING FREQUENCY...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 email@example.com AcuRite 24/7 support at www.