Step 3: Installing The Drivers; In Windows 95 - HP D7808A User Manual

Installing Your HP Fax Modem

Step 3: Installing the Drivers

Step 3: Installing the Drivers
This section shows you how to install the drivers for your HP
Fax Modem.

In Windows 95

NOTE Ensure that Plug and Play is enabled in your PC's BIOS Setup
program. This will ensure that the newly installed modem is
detected.
To do this, enter the PC's BIOS Setup program by pressing
during startup and set
(Your PC's BIOS Setup program may differ from this).
1 After you have restarted your computer, Windows
2 After a few moments, Windows displays the message:
3 After a few moments, Windows displays a message similar
18
automatically detects the new modem as a
, and displays a message. Insert the Windows
Controller
95/98 Drivers disk in the floppy drive and click
Windows found the following driver:
HP Fax Modem PCI Enumerator
Click .
Finish
to:
Please insert the disk labeled HP Recovery
CDROM
(The exact message may differ from this.) This is normal.
It means that Windows needs the Windows 95 installation
or recovery CD-ROM (or disks) that came with your
computer. Put this CD-ROM in the CD-ROM drive and
click .
OK
English
PnP Operating System
F2
to .
Yes
PCI Serial
.
Next