Table of Contents
Advertisement
• Secure Digital (SD) memory cards
have a physical switch to prevent writ-
ing on the card so as to avoid the
accidental erasure of the card's con-
tent. To write-protect the memory card
set the switch to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the
date/time and other settings. The built-in lithium battery is recharged
while you use the camcorder; however, it will discharge completely if
you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power
adapter to the camcorder and leave it connected for 24 hours with the
camcorder off.
Lithium Button Battery
WARNING!
• The battery used in this device may present a fire or chemical burn
hazard if mishandled.
• Do not disassemble, modify, immerse in water, heat above 100 °C
(212 °F) or incinerate the battery.
• Replace with a CR2025 battery made by Panasonic, Hitachi Maxell,
Sony, Sanyo, or with Duracell2025. Use of other batteries may
present a risk of fire or explosion.
• Do not insert the battery into the mouth. If swallowed, seek medical
assistance immediately. The battery case may break and the battery
fluids may cause internal injuries.
• Keep the battery out of the reach of children.
• Do not recharge, short-circuit or insert the battery in the wrong direc-
tion.
• Dispose of the used battery according to applicable recycling regula-
tions.
• Do not pick up the battery using tweezers or other metal tools, as this
will cause a short circuit.
Maintenance/Others
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the camcorder body. Never use chemically
treated cloths or volatile solvents such as paint thinner.
Lens and Instant AF Sensor
• If the lens surface or Instant AF sensor is dirty, autofocus may not work
properly.
• Remove any dust or dirt particles using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use
tissue paper.
LCD Touch Screen
• Clean the LCD touch screen using a clean, soft lens-cleaning cloth.
• Condensation may form on the surface of the screen when the temper-
ature changes suddenly. Wipe it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its internal surfaces.
Stop using the camcorder if condensation is detected. Continued use
may damage the camcorder.
Condensation may form in the following cases:
• When the camcorder is moved quickly from cold to warm places
• When the camcorder is left in a humid room
• When a cold room is heated rapidly
To avoid condensation
• Do not expose the camcorder to sudden or extreme changes in tem-
perature.
LOCK switch
189
Additional Information
!
191
Additional Information
!
• Wipe the battery with a clean dry cloth to ensure proper contact.
• For California, USA only: The lithium battery included contains Perchlorate
Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate for details.
Disposal
When you delete movies or initialize the memory, only the file allocation
table is altered and stored data is not physically erased. Take the nec-
essary precautions when you dispose of the camcorder or memory
card, for example by physically damaging it to prevent the leakage of
private data.
If giving the camcorder or memory card to another person, initialize the
built-in memory (! only) or memory card using the [Complete
Initialization] option (" 40). Fill it up with unimportant recordings, and
then initialize it again using the same option. This makes recovering the
original recordings very difficult.
190
Additional Information
!
• Remove the memory card and battery pack. Then, place the camcorder
in an airtight plastic bag and let it adjust gradually to temperature
changes before removing it from the bag.
When condensation is detected
The camcorder automatically shuts off.
The precise time required for water droplets to evaporate will vary
depending on the location and weather conditions. As a general rule, wait
for 2 hours before resuming use of the camcorder.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to
charge battery packs in any country with power supply between 100 and
240 V AC, 50/60 Hz. Consult a Canon Service Center for information on
plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs compatible with the NTSC
system. NTSC is used in the following regions/countries:
Americas: All of North America and Central America; most Caribbean
islands (except in French territories like Guadeloupe and Martinique); most
of South America (except in Argentina, Brazil and Uruguay). Asia: Only in
Japan, the Philippines, South Korea, Taiwan and Myanmar. Oceania: US
territories (Guam, American Samoa, etc.) and some Pacific islands like
Micronesia, Samoa and Tonga.
192
!
Additional Information
Advertisement
Table of Contents
