Denon DVD-2800 Operating Instructions Manual page 10

ENGLISH
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (P
The red (P
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C
Connect in this way if your TV is compatible with Progressive Scan.
DVD-2800
NOTES:
• Use the three commercially available video cords to connect the DVD-2800's color component output connectors to the TV or
monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is NTSC formated set to
NTSC. (See page 41)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated only)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
10
/C ), blue (P /C ) and brightness (Y) signals are output independently, achieving more faithful
R R B B
, C and Y, etc.). For details, refer to the TV's operating instructions.
R B
COMPONENT
AUDIO DIGITAL OUT VIDEO
OUT (PCM/BITSTREAM) OUT
OPTICAL COAXIAL
L
R
S-VIDEO
OUT
R
AUDIO IN
/C , P /C and Y)
R R B B
VIDEOOUT
Y
P /C
B B
P /C
R R
L
, P and Y/R-
R B
AC IN
To power outlet
TV
P /C P /C Y
R R B B
COMPONENT VIDEO IN