DVD-S2300
5. Procedure for Screw Lock
1. After adjustment, remove the top cover, tray, clamper
base and traverse unit in this sequence.
2. Lay the traverse unit upside down and lock the
adjustment screw with screw lock.
3. After locking, reassemble the traverse unit, clamper
base, tray and top cover.
ELECTRICAL CONFIRMATION /
1. Video Output (Luminance Signal)
Confirmation
Screwdriver,
200mV/div 10µsec/div
Purpose: To maintain video signal output compatibility.
1. Connect the oscilloscope to the S-video output Y
terminal and terminate at 75 ohms.
2. Confirm that the Y level is 1.0 Vp-p ± 20 mV.
38
1.0 Vp-p ± 20mV