Table of Contents
Advertisement
To Adjust the Water Hardness;
1. Press and hold the Programme Selection Key when the machine is off and
press On/Off button simultaneously to turn on your machine. Release the
Programme Selection Key when the water hardness level stored on your machine
is displayed in "r....." format.
2. Start / Stop icon will start flashing as soon as the water hardness level stored
on your machine is displayed in "r....." format.
3. Select the water hardness level suitable to your machine from the Water
Hardness Level Adjustment Table by pressing the Delayed Start Key.
4. Press «Start/Pause/Cancel» key once to store the level you have selected.
5. Start / Stop icon will light continuously when the new water hardness level is
stored.
6. Press the On/Off button to turn off your machine.
Water Hardness Level Adjustment Table
Hardness
English
German
Level
Water
Water
Hardness
Hardness
°dE
°dH
1
Level
st
0-6
0-5
2
Level
nd
7-14
6-11
3
Level
rd
15-21
12-17
4
Level
th
22-28
18-22
5
Level
th
29-42
23-34
6
Level
th
43-75
35-60
If the hardness level of the water that you use is above 80 °dF (French standard
for water hardness) or if you are using well water, then it is recommended to use
filter and water purification devices.
If the hardness level of the water that you use is below 9°dF (French standard for
water hardness), there is no need to use salt in your dishwasher.
If the water hardness adjustment is set to level 1, the "No salt warning indicator"
will illuminate continuously although it is not necessary to use salt. If you use salt
under this condition, salt will not be consumed and the lamp will not illuminate.
French
Position of
Water
regen-
Hardness
eration
Water Hardness Level Indicator
°dF*
adjustment
switch
Press the Delayed Start key to switch
0-9
the water hardness level to position 1.
Press the Delayed Start key to switch
10-20
the water hardness level to position 2.
Press the Delayed Start key to switch
21-30
the water hardness level to position 3.
Press the Delayed Start key to switch
31-40
the water hardness level to position 4.
Press the Delayed Start key to switch
41-60
the water hardness level to position 5.
Press the Delayed Start key to switch
61-107
the water hardness level to position 5.
12 GB
Regeneration Adjustment
Switch
6
Level
th
Very hard water
If the tap water is excessively (6th
degree) hard, set the water hardness
adjustment to level 5 and "Regenera-
tion Adjustment Switch" to position 1.
Hide quick links:
Advertisement
Table of Contents
