35
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery pack. See "Removing the Battery Pack" on page 12.
2
Remove the base cover. See "Removing the Base Cover" on page 14.
Procedure
1
Disconnect the primary video-card heat-sink fan cable from the connector on the
system board.
2
Remove the primary video-card heat-sink fan cable from the routing guides on the
computer base.
3
Loosen the captive screws that secure the primary video-card heat-sink fan to the
computer base.
1
primary video-card heat-sink fan
3
primary video-card heat-sink
fan cable connector
Removing the Video-Card
Heat-Sink Fan(s)
Before working inside your computer, read the safety
Removing the Video-Card Heat-Sink Fan(s)
2
1
2
captive screws (4)
3
67
|