Connecting Lan; Turn On The Computer - Panasonic CF-19 Series Reference Manual

LAN

Connecting LAN

CAUTION
Do not connect the telephone cable to the LAN port.
1
Turn off the computer.
Do not use standby or hibernation.
2
Open the cover and connect the cable.
Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN
cable.
3

Turn on the computer.

Power On by LAN/Wake Up from Wired LAN
NOTE
Even when a password is set in the Setup Utility and [Password on boot] is set to [Enabled], entering the password is
unnecessary for turning on or resuming the computer.
Connect the AC adaptor.
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for four seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
The screen remains dark after the computer resumes from standby. The previous screen display will be restored when
you touch the keyboard, touch pad, touchscreen (only for model with touchscreen) or tablet buttons. Do not touch the
dual touch (only for model with dual touch).
70