Checking The Computer's Usage Status - Panasonic CF-19 Series Reference Manual

Troubleshooting (Advanced)
Others
No response.

Checking the Computer's Usage Status

You can check the computer's usage status in the PC Information Viewer. You may need this information when calling Pana-
sonic Technical Support for advice.
NOTE
This computer periodically records the management information of the hard disk etc. The maximum data volume for
each record is 1024 bytes. The information is only used for estimating the cause when the hard disk goes down by any
possibility. They are never sent to outside via network nor used for any other purpose except for the purpose
described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information his-
tory] in [Hard Disk Status] of PC Information Viewer, and click [OK].
If you have not logged on with the administrator authority, some information will be displayed as [Not Found].
As long as it is activated, the PC Information Viewer will appear in front of all other screens.
Depending on your network environment, it may take 1 minute to start the PC Information Viewer.
1
Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Information
Viewer].
2
Select the item to display the detailed information.
To save the information as a text file
Display the information you want to save.
A
Click [Save].
B
Select the file save range option and click [OK].
C
Select the folder to save the information, input the file name, and click [Save].
D
If automatic saving of the management information record has not been disabled, the records already recorded are
also saved.
Press Ctrl+Shift+Esc to open Task Manager and close the software
application.
An input screen (e.g., password input screen at startup) may be hidden behind
another window. Use Alt+Tab to check.
Shut down by sliding and holding the power switch for four seconds or longer,
and turn on the computer and open the application again. If it no longer works
normally, delete and reinstall it.
Click [start] - [Control Panel] - [Add or Remove Programs].
117