GE GLDA690 Technical Service Manual page 14

2. Snap the latch block into the latch bracket
making sure the spring arm rests in the channel
in the latch bracket.
Latch Bracket
3. Rotate the latch block to compress the spring.
4. With the raised center bar of the latch handle
toward the latch block, insert the latch handle
hinge pins into the holes in the latch bracket.
Latch Block
Raised
Center
Bar
Channel
Latch Block
Latch Block
Latch Handle
– 14 –
5. Insert this latch assembly, including the handle,
into the escutcheon cutout with the latch handle
side toward the bottom of the escutcheon.
6. Assure that the top rib of the handle is tucked
under the top edge of the cutout and attach the
assembly with 2 Phillips-head screws.
Top of
Escutcheon
Top Edge of Cutout
Screws
Top Rib
Latch Handle