GE GLDA690 Technical Service Manual page 20
Built-in dishwasher
Hide thumbs
Also See for GLDA690:
- Owner's manual (81 pages) ,
- Owner's manual (20 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
6.
Remove the 6 Phillips-head screws and the front
brace from the dishwasher.
7.
Locate the wires leading to the heating element
terminals and pull down the 2 nylon terminal
covers.
8.
Disconnect the 2 wires from the heating
element.
Nylon Terminal Covers
Heater Wire
Heater Wire
9.
Remove the outer 8 mm nut that attaches the
ground wire to the element mounting bolt.
Outer Nut
Ground
Wire
10.
Remove the inner 8 mm nut, washer, and spacer
that attaches the element to the bottom of the
tub.
Spacer
Washer
Inner Nut
11.
Lift the right side of the element and release it
from the 2 retainers.
Page 20
Hide quick links:
Advertisement
Table of Contents
