Battery Back-Up System; Using The Ac Adaptor - Akai ACI-7T Instruction Manual

Clock radio
Table of Contents

Advertisement

Available languages

Available languages

BATTERY BACK-UP SYSTEM

This system includes a battery back-up circuit that will maintain the time and alarm settings, and
the preset tuner memories, in the event of a temporary power interruption.
The battery back-up
system requires 2x LR-03 /AAA not supplied. If the back-up battery is not installed, or the
battery
is exhausted, and the AC power supply is interrupted, the time, alarm, and preset memory
stations will be lost. It will be necessary to reset the unit when the power is restored.
The Battery Back-Up compartment is located on the bottom cabinet.
Battery Precautions
Follow these precautions when using a battery in this device.
1. Warning -Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
2. Use only the size and type of battery specified.
3. Be sure to follow the correct polarity when installing the battery as indicated in the Battery
Compartment. A reversed battery may cause damage to the device.
4. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer's directions.)
6. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Using The AC Adaptor

Connect the small female plug of the AC adaptor to the DC In Jack on the back panel.
Connect the housing of the AC adaptor to the 230V AC outlet.
NOTES:
• The housing of the AC adaptor may become warm during operation. This is normal.
• To reduce the risk of electric shock never connect or disconnect the AC adaptor while your
hands are wet.
• Please use original AC adaptor supplied with the unit, otherwise, will damage the unit.
5

Advertisement

Table of Contents
loading

Table of Contents