Connect To Other Devices; Lcd Monitor - Change Display Settings - AEG DVD 4551 Instruction Manual

English
46
Connect Other Playback Devices
Digital Audio Transmission
Connect TV Set

Connect to Other Devices

K
Connect an AV cable to AV (Fig. 2/5) and to the playback device to
view images of another playback device (such as digital camera).
K
Connect the AC adapter cable to the DC IN connector (Fig. 2/5).
K
Connect the AC adapter to a properly installed plug socket.
NOTE:
Other devices can only be connected to the LCD Monitor (slave moni-
tor).
Connect a coaxial cable (not included) to transmit the digital audit signal
to your playback unit or your amplifier.
1. Plug the Audio plug into the COAXIAL socket of the DVD monitor
(Fig. 1/13).
2. Insert the audio plug into the corresponding socket of your playback
unit or your amplifier.
Connect an A/V cable to AV OUT (Fig. 1/14) and to the TV set to view
images on the TV set.
Switch the TV set to AV IN. Observe the TV's user manual.
NOTE:
You need an audio cable with a 4-pin 3.5 mm jack plug to cinch socket,
with a pin length of 17.5 mm.

LCD Monitor - Change Display Settings

K
Press the MODE button (Fig. 2/8), to display the Setup menu.
K
Use the and (Fig. 2/9) buttons to select the option. Use the
(Fig. 2/7) buttons to change the setting.
K
Press the MODE button repeatedly to toggle between the Picture
and Options menu or to hide the menu.
NOTE:
The menu hides itself automatically after a short time if no setting has
been changed.
Picture
You can set the brightness, the contrast and the color in the menu. Use
"Reset" to reset all settings to the default value.
and