Advertisement
Available languages
Available languages
1. This Product
2. Rear output or
subwoofer output
4. Fuse (10 A)
3. Antenna jack
9. Yellow
To terminal always supplied with
power regardless of ignition
switch position.
10. Red
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
11. Black (ground)
To vehicle (metal) body.
5. Connecting cords with RCA
pin plugs (sold separately)
6. Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300 mA
8. System remote control
12 V DC).
+
12. Rear speaker or
subwoofer
≠
13.
Perform these connections when using
the optional amplifier.
17. White
19. Gray
+
14. Front speaker
≠
18. White/black
20. Gray/black
15. Left
21. Green
23. iolet
V
+
25. Rea speaker
r
≠
22. Green/black
24. Violet/black
26. With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
27. Subwoofer output
7. Power amp
(sold separately)
9. Yellow
To terminal always supplied with
+
12. Rear speaker or
power regardless of ignition
subwoofer
switch position.
≠
10. Red
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
+
14. Front speaker
≠
11. Black (ground)
16. Right
To vehicle (metal) body.
+
25.
Rear speaker
≠
Fig. 8
∏ qJAë
1. This Product
4. Fuse (10 A)
3. Antenna jack
6. Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300 mA
12 V DC).
14. Front speaker
15. Left
28. Subwoofer
17. White
19. Gray
+
+
14. Front speaker
≠
≠
18. White/black
20. Gray/black
16. Right
21. Green
23. iolet
V
+
+
28. Subwoofer
≠
≠
22. Green/black
24. Violet/black
29. Note:
Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
Fig. 9
π qJAë
Advertisement
