Table of Contents
Advertisement
Quick Links
Operating Instructions
GB
English,1
CIS 644 DD Z
Contents
Installation, 2-3
Start-up and use, 5-8
HOB
GB
Advertisement
Table of Contents
Related Manuals for Hotpoint CIS 644 DD Z
Summary of Contents for Hotpoint CIS 644 DD Z
-
Page 1: Table Of Contents
Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices CIS 644 DD Z Practical cooking advice Precautions and tips, 9 General safety Disposal Care and maintenance, 10 Switching the appliance off... -
Page 2: Installation
Installation Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. min. 20 mm Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. -
Page 3: Electrical Connection
• 220-240V 3 ~ 50 Hz Fixing The appliance must be installed on a perfectly level • 400V 3 - N ~ 50 Hz supporting surface. Any deformities caused by improper • 400V - 2+2N ~ 50 Hz Separate the wires and connect them in accordance with fixing could affect the features and operation of the hob. -
Page 4: Description Of The Appliance
Description of the appliance Control panel The control panel described in this manual is only a representative example: it may not exactly match the panel on your appliance. TIMER* indicator light INCREASE PROGRAMME TIMER* TIME button display COOKING ZONE PROGRAMMED* BOOSTER* button indicator light... -
Page 5: Start-Up And Use
Start-up and use Switching on the hob The glue applied on the gaskets leaves traces of grease on the glass. Before using the appliance, we recommend you remove these with a special non-abrasive cleaning To switch the hob on, press and hold the button for product. -
Page 6: Timer
2. Adjust the power level of the cooking zone. 3. Confirm by pressing the button. 3. Press the programming button. The indicator light The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). corresponding to the selected zone will start flashing. -
Page 7: Practical Advice On Using The Appliance
Practical advice on using the appliance Overheating protection If the electronic elements overheat, the hob switches off ! Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We automatically and appears on the display, followed by a especially recommend pans made from: cast iron, coated flashing number. -
Page 8: Practical Cooking Advice
Practical cooking advice ª Pressure cooking Frying Pressure cooker • Grilling Boiling • ¶ Crêpes Cooking on a high flame and browning (roasts, steaks, escalopes, fish fillets, fried eggs) ¶ § Fast thickening (liquid juices) Boiling water (pasta, rice, vegetables) Milk §... -
Page 9: Precautions And Tips
Precautions and tips This appliance has been designed and manufactured in • When unplugging the appliance, always pull the plug compliance with international safety standards. The from the mains socket; do not pull on the cable. following warnings are provided for safety reasons and •... -
Page 10: Care And Maintenance
Care and maintenance Switching the appliance off Stainless steel frame (only in models with outer frame) Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. -
Page 11: Technical Description Of The Models
B = booster: the power level of the cooking zone may be boosted to 3000 W * = the maximum power level is limited while the booster is activated for the relevant rear cooking zone (see Start-up and use ). CIS 644 DD Z Hobs Cooking zone Power (W) I 1400 –... - Page 12 05/2011 - 195092600.00 XEROX FABRIANO...
Need help?
Do you have a question about the CIS 644 DD Z and is the answer not in the manual?
Questions and answers