mATX AIMB-562 Series User Manual page 41

10. Optical drive audio connector (4-pin CD)
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.
CD audio connector
Enable the CD - IN function in the audio utilit y when using this
connector.
11. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the optional USB module
cable to any of these connectors, then install the module to a slot opening at
the back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
USB 2.0 connectors
AIMB-562
CD
Right Audio Channel
Ground
Ground
Left Audio Channel
USB56 USB78
1 1
1-31