3.
ITE IDE connector (40-1 pin PRI_EIDE [red])
Supported by the ITE8211F controller, this connector is for Ultra ATA
133/100/66 signal cables. This connector supports two IDE hard disk drives
for easier data storage.
PRI_EIDE connector
4.
Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard
disk drives.
SATA connectors
Install the Windows
or later before using Serial ATA.
AIMB-562
PRI_EIDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
cable to PIN 1.
SATA3
SATA1
®
2000 Service Pack 4 or the Windows
PIN 1
SATA4
SATA2
®
XP Service Pack1
1-27