Tenda W330R User Manual page 48

Wireless-N Broadband Router
you need to add the
Wireless MAC address of
the connecting device into
the Router's AP MAC
address table or select
one from the scanning
table. At the same time,
the connecting device
should be in Lazy,
Repeater or Bridge mode.
Repeater Mode: You can
select the mode to extend
the distance between the
two WLAN devices.
Functioning as a WDS
repeater, the W330R
connects to both a client
card as an AP and to
another AP. In typical
repeater applications, APs
connecting to other APs
equipped with WDS
functionality must also
support WDS. In this
mode, you need to add the
MAC address of the
connecting device into the
43