7 Disassembly and Assembly Instructions
7.1.
Disassembly Flow Chart for the Unit
When assembling, perform this chart conversely.
This is a disassembly chart.
7.2.
Disassembly Procedure for the Unit
7.2.1.
Pedestal
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the 4 screws.
3. Remove the pedestal.
7.2.2.
AC cord clamper B
1. Remove the 2 screws (THEL0239).
2. Remove the AC cord clamper B.
13