Daewoo FR-420N Service Manual page 24

Below process is for RN-420N (Refrigerant type : R-600a) models.
Some parts are differ to RF-420N models. ( Hinge Cover, Door Switch, Wire Harness and Button Door Switch. )
When you change door opening direction ( RF-420N models ), please refer page 20 (Door switch Disassemlby) and below.
No
1
Remove top cover hinge screw with (+) driver.
2
Separate the Cover hinge by using driver.
3
Remove the Door Switch from the cover hinge.
4
Disconnect all wire connector and hinge.
5
Refrigerator Door Cap
Unscrew the Cover Hinge Harness *T *R
and hide the door wire harness.
Procedure
How to change Door opening Dirction (Reversable)
No
6
After hiding door wire harness, remove the button Door
Switch and Cover Bushing.
7
After unscrewing the Cover Hinge Harness *T *L,
disclose the door wire harness.
8
Reassemble the cover and button door switch.
And also assemble the door stopper to opposite side.
(Which is located the Door under Cap. )
9
Freezer Door
Remove the Middle Hinge.
Assemble Cover Bushing & Stopper to the opposite.
10
23
Procedure
Button
Cover Bushing
Hidden
Wire
Stopper
a. Change the location
(screw & division hinge cap)
b. Change the unnder hinge
location to the opposite.