2-2. RN-420N.. Models
No
1
Remove top cover hinge screw with (+) driver.
2
Separate the Cover hinge by using driver.
Be careful not to scratch the cabniet surface.
3. Multi-Duct As ( In Freshfood Compartment )
No
1
Remove screw cap with flat driver
2
Unscrew 2 points
Procedure
Procedure
No
3
Remove the Door Switch from the cover hinge.
4
Disconnect door switch connector.
No
3
Disconnect the Lamp & Sensor wire housing.
21
DISASSEMBLY
Procedure
Procedure