Installing A Sim Card And/Or Replacing The Memory Card; Installation And/Or Replacement - Honeywell Dolphin 70e Black User Manual

Installing a SIM Card and/or Replacing the Memory Card

SIM Card
Short for Subscriber Information Module, a SIM card stores the subscriber's personal information,
GSM/GPRS radio settings, security keys, contacts, etc. SIM cards can be installed in compatible mobile
devices, enabling you to switch devices without losing personal and setup information.
Before installing the SIM card:
• The service provider must activate the SIM card.
• The terminal must be powered Off.
Note: If no SIM card is installed, you can still make emergency phone calls (e.g., 9-1-1).
Memory Card
A microSD memory card is pre-installed in your Dolphin 70e Black powered by Android terminal. You can
expand the terminal's memory capacity by replacing the supplied card with a larger capacity microSD or
microSDHC card.
Note: Applications on your Dolphin 70e Black terminal utilize the microSD card to store files and application data.
Memory card use is recommended to avoid potential application errors or possible data loss.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC
memory cards with Dolphin terminals for maximum performance and durability. Contact a Honeywell
sales representative for additional information on qualified memory card options.
Note: Format the memory card to Fat32 before initial use.

Installation and/or Replacement

1. Press the Power button
2. Remove the battery door battery,
3. Lift the card retention flap for the appropriate socket.
Memory Card
Retainer Flap
Note: Battery retention strap not shown.
to place the terminal in Suspend mode.
see page 2-13.
SIM Card
Retainer Flap
3 - 15