Mounting With Brackets; Installing The Remote Sensor - Pioneer XDV-P650 Installation Manual

Mounting with Brackets

Car mat or chassis

Installing the Remote Sensor

Precaution:
• Do not install on the dashboard where it may be subjected to direct sunlight. High temperatures
may result in damage to the unit.
• Install within the transmission range of the remote control signal.
Stick the supplied double-sided tape to the back of the remote sensor, and attach it to the
center console.
Tapping screw (6 × 16 mm)
Cover
Drill 4 to 4.5 mm diameter holes.
Bracket
Truss screw (5 × 8 mm)
Remote sensor
Double-sided tape
13