Pioneer DVH-P5850MP Installation Manual page 5

Connecting the Units
Connection method
1.
Note
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the
parking brake switch.
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Front speaker
Left
Rear speaker
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
When you connect separately sold multi-channel processor
(DEQ-P7650) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Clamp the lead.
Power supply side
Ground side
White
+
≠
White/black
Green
+
≠
Green/black
2. Clamp firmly with
needle-nosed
pliers.
Gray
+
≠
Gray/black
Violet
+
≠
Violet/black
Parking brake
switch
Front speaker
Right
Rear speaker
En 5