Fault Finding Hints; Service Recommendations; Environmental Information; Replacement Parts - Flymo Mow n Vac Original Instructions Manual

Fails to Operate
1. Is the Power Turned On?
2. Check the fuse in the plug, if blown replace.
3. Fuse continues to blow?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan
blades.
3. Raise to a higher height of cut. See Adjusting the
Cutting Height.
4. If poor flotation persists?
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
1. We strongly recommend that your product is
serviced at least every twelve months, more often
in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most
Husqvarna UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on
the product rating label.
6. Should it be necessary for work to be carried out
Plastic Cutters
Reference no.:
Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where
practical, components manufactured in the most environmentally responsible manner, according to company
procedures, and with the potential for recycling at the end of the products' life.
• Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered when disposing of 'end-of-life' product.
• If necessary, contact your local authority for disposal information.
• The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your
household waste disposal service or the shop where you purchased the product.

Fault Finding Hints

Service Recommendations

Replacement Parts

FLY014

Environmental Information

Poor Collection
1. Is the grassbox fitted correctly?
2. Are you using in straight lines?
3. Are you cutting more than one third of the grass
length?
4. Do you need to raise the cutting height?
5. Follow the procedure described in "Poor Flotation".
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Replace broken or missing plastic cutters.
3. Check plastic cutters are fitted correctly.
4. If vibration persists?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
by your Service Centre, it is important to take your
complete machine including cable and any
extension cables used.
A network of specialist dealers can be found in your
local Yellow Pages. To obtain service on your Flymo
product simply telephone or visit your local Service
Centre. Should you require service under the terms of
our guarantee the Service Centre will require proof of
purchase.
All of the centres listed stock genuine Flymo Spare
Parts.NOTE: Our Service Repairers act on their own
behalf and are not empowered to commit or legally
bind Husqvarna UK Ltd. in any manner whatsoever.
Part no.: 513846990