Defining Mstp Properties - Linksys SFE1000P Administration Manual

Defining MSTP Properties

The MSTP Properties Page contains information for defining global MSTP settings, including region
names, MSTP revisions, and maximum hops.
To define MSTP:
1. Click Bridging > Spanning Tree > MSTP > Properties. The MSTP Properties Page opens:
2. Define the relevant fields.
3. Click Apply. The MSTP properties are defined, and the device is updated.
Chapter 11: Configuring Spanning Tree
Defining Multiple Spanning Tree
SFE1000P Gigabit Ethernet Switch Administration Guide
MSTP Properties Page
Chapter
11
80