Configuring Bandwidth - Linksys SFE1000P Administration Manual

Configuring Bandwidth

The Bandwidth Page allows network managers to define the bandwidth settings for specified egress
and ingress interfaces.
Rate Limits and Shaping are defined per interface:
• Rate Limit sets the maximum bandwidth allowed on ingress interfaces.
• Shaping Rate sets the maximum bandwidth allowed on egress interfaces. On GE ports,
traffic shape for burst traffic (CbS) can also be defined.
1. Click Quality of Service > General > Bandwidth. The Bandwidth Page opens:
2. Click the Edit button. The Edit Bandwidth Page opens:
3. Modify the relevant fields.
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Bandwidth Page
Edit Bandwidth Page
Chapter
13
103