Lutron Electronics HD-RD Installation Instructions Manual
Lutron Electronics HD-RD Installation Instructions Manual

Lutron Electronics HD-RD Installation Instructions Manual

Designer-style remotes

Advertisement

Quick Links

Installation Instructions
Please Read Before Installing
Overview
The HD-RD Remote Dimmer and the HD-RS Remote
Switch are for use with HomeWorks Maestro Dimmers and
Switches.
Up to nine HD-RD Remote Dimmers may be used with a
HomeWorks Wired or RF Maestro Dimmer, and up to nine
HD-RS Remote Switches may be used with a HomeWorks
Wired or RF Maestro Switch.
Important Notes
Codes: Install in accordance with all local and national elec-
trical codes.
Danger: These controls must not be used to con-
trol equipment which is not visible from every con-
trol location. They must also not be used to con-
trol equipment which could create hazardous situ-
ations such as entrapment if operated accidentally.
Examples of such equipment which must not be operated
by these controls include (but are not limited to) motorized
gates, garage doors, industrial doors, microwave ovens,
heating pads, etc. It is the installer's responsibility to ensure
that the equipment being controlled is visible from every
control location and that only suitable equipment is connect-
ed to these controls.
Overheat Damage: To reduce the risk of overheating and
possibly damaging other equipment, do not install
to control receptacles or motor-operated appliances.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor
use only.
Spacing: If mounting one control above another, leave at
least 4 1/2" (114mm) vertical space between them.
Wallplates: Lutron Claro
and Satin Colors
®
recommended for best color match and aesthetic appear-
ance. Do not paint controls or wallplates.
Cleaning: To clean, wipe with a clean damp cloth. DO NOT
use any chemical cleaning solutions.
Wallboxes: Lutron recommends using 3-1/2" (89mm) deep
wallboxes for easier installation. Several controls may be
installed in one multigang wallbox - see Multigang
Installations (page 2).
Remotes: Use only Lutron
®
Dimmers (HD-RD) with HRD/HWD-6D, -6ND, -10D, -10ND,
and -5NE controls. Use only Lutron HomeWorks Maestro
Remote Switches (HD-RS) with HRD/HWD-8ANS controls.
Up to 9 HD-RD or HD-RS controls may be used with a
HomeWorks Maestro Dimmer or Switch. Mechanical 3- or 4-
way switches will not work.
wallplates are
TM
HomeWorks Maestro Remote
Designer-Style Maestro
HD-RD, -RS
120/127 V ~, 50/60 Hz
HD-RD
Remotes
®
HD-RS
1

Advertisement

Table of Contents
loading

Summary of Contents for Lutron Electronics HD-RD

  • Page 1 -5NE controls. Use only Lutron HomeWorks Maestro Remote Switches (HD-RS) with HRD/HWD-8ANS controls. Up to 9 HD-RD or HD-RS controls may be used with a HomeWorks Maestro Dimmer or Switch. Mechanical 3- or 4- way switches will not work.
  • Page 2: Installation

    Wire controls using Wiring Diagrams 1 and 2 (page 3). When using power boosters or interfaces, use Wiring Diagrams 3, 4, and 5 (page 4). Up to nine HD-RD or HD- RS remotes may be connected to the -6D, -6ND, -10D, - 10ND, -5NE, or -8ANS controls.
  • Page 3: Wiring Diagram

    Remote Dimmer Black 120/127VAC Green Blue 50/60Hz Neutral Wiring Diagram 2 Multi-Location Installation with Neutral -6ND, -10ND, -5NE with HD-RD, -8ANS with HD-RS Remote Dimmer/Switch Black 120/127VAC Green Blue 50/60Hz Neutral Remote Dimmers/Switches may be connected to the HomeWorks Maestro Dimmer/Switch. Total Blue...
  • Page 4 Wiring Diagram 3 Installation with Power Booster or ELV Interface 1, 2 -6ND, -10ND with HD-RD Hot/Live Black 120/127VAC Green 50/60 Hz Neutral Wiring Diagram 4 Installation with Fluorescent Dimming Ballast Interface 1, 2 Remote -6ND, -10ND with HD-RD Dimmer...
  • Page 5: Local Operation

    Pressing the Tapswitch on any Dimmer, Switch, or Remote will alternately turn the lights ON and OFF. For HD-RD, the ON level will be the level previously set using the Dimming Rocker. Press and hold the top or bottom of the Dimming Rocker to raise or lower the light level.
  • Page 6: Troubleshooting Guide

    • Wiring error. Check wiring to be sure it agrees with installation instructions and wiring diagrams. Lights don’t switch ON/OFF Wiring when HD-RD or HD-RS tap- • Wires shorted. Make sure the blue wires are not grounded or shorted to any other wires. switch is pressed •...
  • Page 7 Notes:...
  • Page 8: Technical And Sales Assistance

    Technical and Sales Assistance If you need assistance, call the toll-free Lutron Technical Support Center. Please provide exact model number when calling. (800) 523-9466 (U.S.A., Canada and the Caribbean) Other countries call: Tel: (610) 282-3800 Fax: (610) 282-3090 Visit our Web site at www.lutron.com Lutron Electronics Co., Inc.

This manual is also suitable for:

Hd-rsMaestro ald-hd-rsDesigner-style maestro remotesMaestro ald-hd-rdHomeworks maestro hd-rdHomeworks maestro hd-rs

Table of Contents