Advertisement
WPS push-button configuration method
1
Check the LAN cable is not
connected, then turn on the unit.
When the LINK indicator turns off, go to the next
step.
2
Place the unit and wireless router
closer, then press the WPS buttons as
follows.
ˎPress and hold the WPS button of the unit
until you hear a beep.
ˎWithin 90 seconds, press the WPS button of
the router.
When the Wi-Fi connection is complete, the
LINK indicator lights up in green.
3
Play music by operating your PC
(iTunes).
Music in your iTunes will be heard from the unit
via AirPlay.
To enjoy more dynamic sound, see page 19.
15
GB
Advertisement
