Specifications; Gearcase Specification Chart - Polaris Ranger 4x4 700 EFI Owner's Manual

MAINTENANCE
Gearcases

Gearcase Specification Chart

Gearcase
Main Gearcase
(Transmission)
Front Gearcase
Rear Gearcase
(4X4)
Transmission (Main Gearcase)
Always check and change the transmission oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 62. Maintain the
oil level even with the bottom of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 72 for recommended
lubricants, capacities and torque specifications. See page 112 for the
part numbers of Polaris products.
Oil Check
The fill plug is located at the rear
of the vehicle.
1. Position the vehicle on a level
surface.
2. Remove the fill plug.
3. Check the oil level.
4. Add the recommended oil as
needed.
5. Reinstall the fill plug. Torque
to specification.
72
Lubricant
Premium AGL
Synthetic
Gearcase Lube
Premium Demand
Drive Hub Fluid
Premium ATV
Angle Drive Fluid
Capacity Fill Plug
Torque
43.6 oz. 14 ft. lbs.
(1290 ml) (19.4 Nm)
9.3 oz. 8-10 ft. lbs.
(275 ml) (11-13.6 Nm
18 oz. 40-50 ft. lbs.
(532 ml) (54-68 Nm
Drain Plug
Torque
14 ft. lbs.
(19.4 Nm)
11 ft. lbs.
(15 Nm)
30-45 in. lbs.
(3-5 Nm)
Fill
Plug