Hotpoint BHWM 149 Instructions For Use Manual
Hide thumbs
Also See for BHWM 149:
- Instructions for use manual (20 pages) ,
- Instructions for use manual (20 pages)
Table of Contents
Advertisement
Instructions for use
GB
English, 1
BHWM 149
WASHING MACHINE
Contents
Installation, 2-3-4-5-6-7
Connecting the electricity and water supplies
Cutting off the water or electricity supply
and starting a wash cycle, 10-11
Wash cycles, 12
Personalisation, 13
Troubleshooting, 15-16
Assistance, 17-18
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint BHWM 149
Summary of Contents for Hotpoint BHWM 149
-
Page 1: Table Of Contents
Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 9 BHWM 149 General safety Disposal Opening the porthole door manuall Description of the washing machine... -
Page 2: Unpacking And Levelling
Installation ! Keep this instruction manual in a safe place for the angle of inclination, measured according to future reference. Should the appliance be sold, tran- the worktop, must not exceed 2°. sferred or moved, make sure the instruction manual Levelling your appliance correctly will provide accompanies the washing machine to inform the it with stability and avoid any vibrations, noise... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &... -
Page 5: Technical Data
Technical data BHWM 149 Model width 59.5 cm Dimensions height 81.5 cm depth 54.5 cm Capacity from 1 to 7 kg please refer to the technical Electrical data plate fixed to the ma- connections chine maximum pressure 1 MPa (10 bar) -
Page 6: Instructions For The Fitter
Instructions for the fitter Door Mounting Accessories (Fig. 1-2-3-4-5). Mounting the wooden panel onto the door and inserting the machine into cabinets: In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging. - Page 7 Using the Drilling Template. - To trace the positions of the holes on the left- hand side of the panel, align the drilling tem- plate to the top left side of the panel using the lines traced on the extremities as a reference. - To trace the positions of the holes on the right-hand side of the panel, align the drilling template to the top right side of the panel.
-
Page 8: Care And Maintenance
Care and maintenance Cutting off the water and electri- To access the pre-chamber: city supplies 1. unscrew the lid by rotating it anti- • Turn off the water tap after every wash cycle. clockwise (see figu- This will limit wear on the hydraulic system in- re): a little water may side the washing machine and help to prevent trickle out. -
Page 9: Precautions And Tips
Precautions and tips must be separately collected. Consumers should contact This washing machine was designed and constructed in their local authority or retailer for information concerning the accordance with international safety regulations. The fol- correct disposal of their old appliance. lowing information is provided for safety reasons and must therefore be read carefully. -
Page 10: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DOOR SPIN SPEED LOCKED knob TEMPERATURE ON/OFF button indicator light knob WASH CYCLE FUNCTION knob buttons with START/PAUSE indicator lights Detergent dispenser drawer button with indicator light Detergent dispenser drawer: used to dispense detergents... -
Page 11: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door. -
Page 12: Wash Cycles
Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Fabric Wash softener Essentials Cotton: extremely soiled whites. 90° 1400 2,16 160’ Cotton Standard 60° (1): heavily soiled whites. 60° 1400 ... -
Page 13: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 14: Detergents And Laundry
Hotpoint is For best results liquid detergent should be poured in the the first washing machine brand to be approved by The dispenser immediately before the start of the programme. -
Page 15: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem Possible causes/Solution: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. - Page 16 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 17: Assistance
OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 18: After Sales Service
Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk... - Page 20 195105021.02 09/2012 - Xerox Fabriano...