Hotpoint BHWM 149 Instructions For Use Manual
Hide thumbs
Also See for BHWM 149:
- Instructions for use manual (20 pages) ,
- Instructions for use manual (20 pages)
Table of Contents
Advertisement
Quick Links
Instructions for use
GB
English, 1
BHWM 149
Contents
Installation, 2-3-4-5-6-7
Connecting the electricity and water supplies
Wash cycles, 10
Table of wash cycles
Personalisation, 11
Detergent dispenser drawer
Cutting off the water or electricity supply
Troubleshooting, 15-16
Assistance, 17-18
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint BHWM 149
Summary of Contents for Hotpoint BHWM 149
-
Page 1: Table Of Contents
Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle Wash cycles, 10 Table of wash cycles BHWM 149 Personalisation, 11 Setting the temperature Setting the spin speed Functions Detergents and laundry, 12 Detergent dispenser drawer... -
Page 2: Unpacking And Levelling
Installation Levelling your appliance correctly will provide it with Keep this instruction manual in a safe place for future stability and avoid any vibrations, noise and shifting du- reference. Should the appliance be sold, transferred or ring operation. If it is placed on a fitted or loose carpet, moved, make sure the instruction manual accompanies the adjust the feet in such a way as to allow enough room washing machine to inform the new owner as to its opera-... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on the Connect the drain hose, machine. without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between 65 machine’s plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifying the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &... -
Page 5: Technical Data
Technical data Model BHWM 149 width 59.5 cm Dimensions height 81.5 cm depth 54.5 cm Capacity from 1 to 7 kg Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water connections minimum pressure 0.05 MPa (0.5 bar) drum capacity 52 litres Spin speed up to 1400 rotations per minute Test wash cycles in accordance programme 1; temperature 60°C and with directives 40°C. 1061/2010 and 1015/2010 This appliance conforms to the following EC Directives: - 2004/108/EC (Electromagnetic Compatibility) - 2006/95/EC (Low Voltage) - 2002/96/EC... -
Page 6: Instructions For The Fitter
Instructions for the fitter Door Mounting Accessories (Fig. 1-2-3-4-5). Mounting the wooden panel onto the door and inserting the machine into cabinets: In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging. - Page 7 Using the Drilling Template. - To trace the positions of the holes on the left-hand side of the panel, align the drilling template to the top left side of the panel using the lines traced on the extremities as a reference.
-
Page 8: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DOOR SPIN SPEED LOCKED knob TEMPERATURE ON/OFF button indicator light knob WASH CYCLE FUNCTION knob buttons with START/PAUSE indicator lights Detergent dispenser drawer button with indicator light Detergent dispenser drawer: used to dispense de-... -
Page 9: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door. -
Page 10: Wash Cycles
Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Fabric Wash softener Essentials cycles Cottons: extremely soiled whites. 90° 1400 2,16 160’ Cottons (1-2): heavily soiled whites. 60° 1400 1,112 185’ Cottons (2): lightly soiled whites and delicate colours. -
Page 11: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 12: Detergents And Laundry
Do not pour detergent into the middle compartment (*). chine. Hotpoint is the first washing machine brand to be Detergent should only be poured into the compartment 1. approved by The Woolmark Company for Apparel Care-... -
Page 13: Precautions And Tips
Precautions and tips The crossed out “wheeled bin” symbol on the This washing machine was designed and constructed product reminds you of your obligation, that when in accordance with international safety regulations. The you dispose of the appliance it must be separately following information is provided for safety reasons and collected. -
Page 14: Care And Maintenance
Care and maintenance Cutting off the water and electricity sup- To access the pre-chamber: plies 1. unscrew the lid by rota- ting it anti-clockwise (see • Turn off the water tap after every wash cycle. This will figure): a little water may limit wear on the hydraulic system inside the washing trickle out. -
Page 15: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem Possible causes/Solution: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. - Page 16 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 17: Assistance
DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 18: After Sales Service
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. - Page 20 195091532.01 01/2012 - Xerox Fabriano...