Easy-To-Use Controls; The Menu System; Quick View - Digi-Frame DF-560 User Manual

Easy-to-use controls:

The icon-based menus on the Digi-Frame™ are controlled by a group of
three buttons and a wheel. Except for the Power Switch, all of the controls
are located on one side of the Digi-Frame™. It is the top in landscape mode,
and the right side in portrait mode.
The Menu Wheel:
Click the Menu Wheel at any time to enter the control menu.
From this menu you can customize slideshows, and take advan-
tage of the many features of the Digi-Frame™.
While in the menu system pressing (;) will exit any menu and
return to Slideshow mode.
The menu system is covered in greater detail in the Digi-Frame™
Menu System chapter.
The Manual Control Buttons:
The three buttons between the wheels on the control side of the
Digi-Frame™ provide control of image viewing.
Press the (;) button to pause or restart the slideshow. When the
show is paused, the play/pause (;) resumes the slideshow.
Press the (4) button to advance to the next picture.
Press the (3) button to go back to the previous picture.
The buttons can have a variety of other functions while in the
menu system. Follow the onscreen directions.
The Contrast Wheel:
The Digi-Frame™ is easy to adjust for different ambient lighting
conditions.
With the Digi-Frame™ in operation, rotate the contrast wheel to
create the optimum display setting.
The Power Switch:
The Power Switch is located on the back of the Digi-Frame™. It has two
positions, On and Off.
Be sure that the power is off before inserting and removing memory cards.
Be sure that the power is off before plugging in or unplugging the Digi-
Frame™ from the wall socket. This will help protect the electronics from
possible power surge damage.
Turning the Digi-Frame off when not in use will prolong the life of the
screen.
14
Digi-Frame™ Menu System
The Digi-Frame™ Menu System:
Clicking the Menu Wheel during the slide show takes you to the menu
system. A list of icons is shown at the left-hand side of the screen, and the
icon's function is displayed across the top of the screen. Rotating the Menu
Wheel highlights each icon in turn. Click the wheel to enter a sub-menu for
the selected icon. Press (;) to exit the menu system and return to Slide
Show at any time.
Important!
On any menu that has thumbnail images, you cannot select pictures
until all of the thumbnails are drawn.
Note that in screens involving thumbnail images the thumbnails will take a
few moments to draw the first time. Once they've been drawn in any
menu screen, they will redraw rapidly the next time they're used in a menu
screen.You may also have your Digi-Frame generate all of the thumbnails at
once by selecting "Optimize Card" from the "Tools" menu.

Quick View:

Quick View shows a small "thumbnail" for each image on the
memory cards currently inserted. Rotate the wheel to highlight
the desired image, then click the wheel to "zoom in" on the
highlighted image. Click the wheel again to return to the Quick
View screen. If more images are stored than will fit on the
screen at one time, keep rotating the wheel past the last thumb-
nail, and the thumbnails will scroll to reveal more images.
Pressing the Forward button will select the picture immediately
below the currently selected picture. The Back button will select
the one directly above. the currently selected picture.
Press (;) to exit Quick View and return to the Slide Show.
15