Establishing The S-Air Connection - Sony AIR-SA20PK Operating Instructions Manual

To use the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R03 (size AAA) batteries,
0
side first, matching the polarities shown
below.
Remote for the main unit
(RM-ANU045)
Remote for the sub unit
(RM-ANU046)
Notes on using the remote
• With normal use, the batteries should last for
about six months.
• Do not mix an old battery with a new one or
mix different types of batteries.
• If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Establishing the S·AIR
connection
You can easily establish the connection
by setting the same S-AIR ID for the
main unit and the sub units.
1
Check that the wireless
transceivers are inserted
securely to the main unit and
the sub units (page 19).
2
Turn on the main unit and the
sub units.
Set the POWER switch on the rear
panel to "ON."
The POWER indicator on the unit
lights up.
Im!lmI
Press
1/6.
3
Set the same S-AIR ID for the
main unit and the sub units.
BmJmfI
Set the S-AIR ID selector on the rear
panel to the desired S-AIR ID.
Set the S-AIR ID selector on the rear
panel to the same S- AIR ID as the
main unit.
Tip
The S-AIR ID is set at the factory to ''A.''