Table of Contents
Advertisement
Sub unit (AIR-SA1SR)
Amplifier section
U.S.A. model:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 3 ohms loads, both channels driven
from 300 - 20,OOOHz; rated 4 watts per '
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
Other models:
Continuous RMS power output (reference):
4
+
4
watts (3 ohms at 1 kHz, 10%
THD)
Output
(: (stereo
mini
jack):
Accepts headphones with an
impedance of 8 ohms or more
Speaker section
Speaker system:
Full range, bass- reflex type
Speaker units:
65 mm, cone type (2)
Nominal impedance:
3 ohms
Wireless transceiver (EZW-RTl 0)
Communication System:
S-AIR Specification version 1.0
Output:
12.0 milliwatts
Frequency band:
2.4000 GHz - 2.4835 GHz
Modulation method:
DSSS
Power requirements:
DC 3.3 V, 350 rnA
Dimensions (w/h/d):
50
x
13
x
60 mm
Mass:
24 g
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
15 watts
Dimensions (w/h/d):
Approx.
300
x
136
x
115
mm
Mass:
Approx. 2.2 kg
Design and specifications are subject to
change without notice.
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Advertisement
Table of Contents
