Test Data A Glance / Wiring / Re-Wiring - Electrolux MC2660E (EU) Service Manual

Parts
Thermal cut-out (OVEN)
Oven lamp
High voltage capacitor
Magnetron
Power transformer
Fuse
Thermal cut-out (Magnetron)
WARNING: WIRING / RE-WIRING.
Before carrying out any work; carry out 3D
checks.
1. Disconnect the supply
2. Door opened and wedge open.
3. Discharge the high voltage capacitor.
RE-WIRING.
Ensure the following:
1. Wires must not touch:
a) High voltage parts.
(Magnetron, high voltage transformer, high
voltage capacitor and high voltage
rectifier).
b) Parts that become hot.
(Heating elements, oven lamp, oven cavity
magnetron and high voltage transformer).
SOI 05.06 FV
TEST DATA AT A GLANCE
Symbol Value / Data
TC01 125°C
OL 240-250V 25W
C 1.02µF AC 2100V (EU)
0,97µF AC 2100V (UK)
MG Filament < 1
Filament – chassis
T Filament winding < 1
Secondary winding Approx. 160
Primary winding Approx. 2
F1 F8A 250V
TC02 125°C
WIRING/RE-WIRING
c) Sharp edges.
d) Movable parts.
2. Positive lock connectors are fitted correctly.
Ensure the locking pin is located correctly.
3. Wires are connected correctly as per pictorial
diagram.
4. No wire leads are trapped by the outer wrap.
32/34
Ω
∞
ohm.
Ω
.
Ω
(Bottom plates, oven cavity, waveguide
flange, chassis support and other metallic
parts).
( Fan blade, any motor, switch).
.
Ω
599 36 78-44