Euphonix MC Transport User Manual page 54

3. Press the ENTER key to move the cursor to the next screen, in this case the
4. Use the Jog Wheel to set the first field of the IP Address.
5. Press the ENTER key to move the cursor to the second field (Figure A-2
6. Rotate the Jog Wheel to set the second field of the IP address.
54
7. Use the techniques described to set the remaining IP Address fields.
8. After setting the last IP Address field, press the ENTER key to move the
9. Use the techniques described to set the Subnet Mask.
10. Press the two leftmost Soft Keys simultaneously to save this static IP ad-
first field of the IP Address screen (Figure A-2 left).
Press the ENTER key to cycle the cursor back to a previous field or screen to
change a parameter to a different value.
Figure A-2 IP Address displays
Alternately, press the + or - keys on the Numeric Keypad to increment or
decrement the value, respectively. You can also enter the number directly
using the Numeric Keypad.
right).
See step 4 for alternate methods.
cursor to the first field of the Subnet Mask screen (Figure A-3).
Figure A-3 Subnet Mask display
dress. Power the MC Transport off and on to use the new IP address.
To cancel any changes made to the IP address at any time, power off the MC
Transport before pressing the two leftmost Soft Keys simultaneously.
AUDIO | VIDEO MEDIA CONTROLLER