Chapter 2: Installation And Setup; Unpacking And Elevating The Mc Transport - Euphonix MC Transport User Manual

AUDIO | VIDEO MEDIA CONTROLLER

Chapter 2: Installation and Setup

Euphonix is dedicated to making your MC Transport experience enjoyable and trou-
ble-free so we will periodically update the following software and documentation:
• EuControl: This software runs your MC Transport and communicates to your
audio/video application. Always download the new version if prompted to do
so after launching EuControl.
MC Transport User Guide (PDF): This is the complete user guide for your MC
•
Transport.
EuCon Application Setup Guide (PDF): The MC Transport supports many ap-
•
plications, each with a slightly different setup procedure. This document in-
cludes supplementary instructions for each application.
Before proceeding, download the latest versions from:
www.euphonix.com/artist/support
2.1

Unpacking and Elevating the MC Transport

Unpack your MC Transport, power supply, installation CD, Ethernet crossover
cable, and riser brackets.
The MC Transport can be elevated or angled using small foldout legs on the
bottom of the unit or elevated and angled by attaching the larger riser brackets.
Since both methods require turning the MC Transport over, it is easier to do this
before attaching any cables. Turn it over and place it on a soft surface.
Pull out all four of the small foldout legs to moderately elevate the unit; pull out
only the back two to angle the unit towards you. Pull out the metal clips from the
same area as the legs and move them until they snap into the legs (Figure 2-1
left).
15