Maintenance; Cleaning The Floor Nozzle; Replacing The Exhaust Filter - Panasonic MC-UL712 Operating Instructions Manual

Maintenance

WARNING
- Remove the plug from the socket
outlet before cleaning or maintaining
the appliance.
CAUTION
- Do not use detergent or any other
cleaning liquids.
Cleaning the outside of the
appliance
Clean the outside of the appliance with a
soft cloth.

Replacing the exhaust filter

Replace the exhaust filter once a year.
Pull out the exhaust filter and insert a
new exhaust filter to the main body.
1
Hold the filter cover as shown, and
pull it out.
Filter cover
2
To install a new exhaust filter or
replace the current one, put it into its
original position.
Exhaust filter
(HEPA exhaust filter)
3
Place the filter cover to the body as
shown and press into its original
location.

Cleaning the floor nozzle

1
Cut off any carpet pile and lint
entangled around the beater bar for
the floor nozzle with a pair of scissors.
2
Release the lower plate by rotating
the lower plate latches to the UNLOCK
position.
Latch
3
Remove the lower plate and remove
any residue that may exist in belt area.
4
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle.
5
Press lower plate onto nozzle and
secure by rotating the lower plate
latches to the LOCK position.
CAUTION
Do not wash the floor nozzle with
water.
9