Adjust The Tone - Princeton HP-3 Owner's Manual

(16) ADJUST THE TONE

Adjust tone with other instruments.
You can collate the sound while press the key and you can also collate by inputting the center A frequency.
1.collate the sound while listening
A. Get ready
Hold down the button of transpose, Then press the button of demonstration, the lights of transpose and demonstration flash.
the strong button of strength and the soft button of strength turn on.
B. Collate the sound
Press the soft key while increasing the tone
Press the strong key while decreasing the tone
Collate the tone while pressing the key
C. Come back
Press the soft key and the strong key at the same time, the soft key and the strong key turn on.
D. Quit from the adjusting of the tone
Press the button of transpose and the light turn off.
2.input the number to change the tone.
A. Get ready to input the number
Hold down the button of transpose and demonstration, and press the initial key(B5), the light of transpose and
demonstration flash quickly.
B. Input the number
Input the frequency number value (A3 in the center)
For example: while input 442HZ,press the following key:
4-E6
4-E6
2-D6
C. Stop the setting
Press the input key (B6), the light of transpose turn off (this light is on while the transpose is going),the light of
demonstration turns off.
D. Quit from the setting
Press the button of transpose, the light of transpose turn off (this light is on while the transpose is going), the light of
demonstration turns off. The frequency of A3 is 440HZ.
The input number should be 427—453, the other number is invalid.
The frequency of A3 is 440HZ when the power is on
17