Selection Of The Touch Sensitive - Princeton HP-3 Owner's Manual

C. When the power in connected, the tempo is 4 beat tempo
3. Change the speed.
Move the speed/balance adjuster, the speed turns down when it move leftwards and turns up when it move rightwards.
4. Change the volume
Hold down the metronome button, and the light begin to flash, move the speed/balance adjuster to change the volume.
● When power is on, the volume is the initial volume set by the factory
●
Before moving the adjuster, the volume is the last volume set.
Press the metronome button------the light turns off, the function stops
5. Stop setting the volume
Press the metronome button, the light turns on from flashing. The speed/balance adjuster is in the state of adjusting the
speed.
6. Stop the metronome function
Press the metronome button again and the light turns off.
7. In order to set the exact speed, you should go into the input state firstly.
A. Hold down the metronome button and press the B5 (starting) button, the light flashes quickly.
B. Input the number
Input the speed number with the key from C6-A6
For example: press 1-C#6,3-D#6,4-E6 one by one, then it means the speed is 134
C. Stop the setting
Press the input key (B6), the setting stops, the light turns on, and the metronome works according to the speed set.
(12) SELECT THE FUNCTION OF TOUCH SENSITIVE
3 touch sensitive
Standard: sound made by the standard piano touch.
Strong: even touching the key softly can make strong sound.
Soft: opposite to the strong key, only powerful touch can make the sound strong. It is the best position to practice your
fingering.
Change the touch sensitive key.
A. Select the strong touch. Press the strong key -------the light turns on.
B. Select the soft touch. Press the soft key ----- the light turns on.
D. Select the standard touch. Press the button of which the light is on – the light turns off.
Relation between the light and the touch
14