Function Of Recording - Princeton HP-3 Owner's Manual

Status
Standard
Soft
Strong
● C hange the touch sensitive , is to change the relation between the strength and the acoustics.
●
Structure of the keyboard is not changed.

(13) FUNCTION OF RECORDING

1. Record.
A. Get ready to record. Press the record button and the light twinkles.
B. Begin to record
a. Start the recording (no time record)
the recording start when you play ( press the keyboard
b. Start the recording (with time record)
Press the metronome button, and the recording start after the time engaged, the light turns on.
c. Stop the recording
Press the record button again. The record light turns off .
● Memory capacity - - a
Content of record includes pedal operation, change of timbre and the pause etc. example: when the amount of pedal operation
record increase, the amount of record that is played through the keyboard decrease.
● Little recording room
The record light start to twinkle when the record room lack.
The record light is turned off and the record stops when the record amount exceed 5000 tones.
●
Stop the recording
Press the record button again and the light is turned off.
● Use the metronome
Before the recording, operate the metronome, and it will be recorded.
● Change the tempo
Tempo can not be changed during the recording.
●
Change the speed
Speed can not be changed during the recording.
2. Playback
A. Start the playback
The light
Strong Soft
Off Off
On Off
Off On
b out 5000 tones.
、 s tep the pedal).
15