Cd Player; Playing A Cd - Teac PCD450iP Instruction Manual

Cd radio with docking for iphone/ipod
Table of Contents

Advertisement

4. CD PLAYER

This CD-player can play Audio discs, CD-R, and CD Rewritable. Do not try to play CD-
ROM, CDI, VCD, DVD or computer software CDs.
1 Adjust the FUNCTION selector to CD
2 To open the CD door, press the CD door at the edge marked CLOSE/OPEN.
3 Insert a CD, CD-R or CD-RW with the printed side facing up and press the CD door
gently to close it.
4 Press PLAY/PAUSE
5 To pause playback press PLAY/PAUSE /
To resume, press PLAY/PAUSE again.
6 To stop CD playback, press STOP
Selecting a different track
During playback you can use
• If you have selected a track number in the Stop or Pause position, press
PLAY/PAUSE /

to start playback.
• Press
once briefly for the next track, or press repeatedly until the desired track
number appears on the display.
• Press
more than once briefly for a previous track.
REPEAT MODE:
REPEAT1-plays the current track continuously
REPEAT ALL-plays the entire CD continuously
• Press REPEAT button repeatedly to through the repeat mode listed below
REPEAT 1>REPEAT ALL>NORMAL
Programming track numbers into a playlist:
You may store up to 20 tracks in the desired sequence. If you like, store any track more
than once.
1. In STOP mode, press the PROGRAM button
-the display shows"01"and"PROG" briefly.
 
2. Press
or
for your desired track.
3. Press PROGRAM button to store the track
4. Repeat steps 1 to 3 to store all desired tracks in this way.
5. To play your playlist, press PLAY/PAUSE
• Reviewing your set playlist
• In the stop mode, press
Erasing a program
You can erase the contents of the playlist with the following actions:
-Opening the CD door;
-Selecting other audio input sources;
-Pressing STOP
button twice

Playing a CD


/
on the set to start playback.

.
or
to select a particular track.

/ .
or
,the display will show you stored tracks.
 
10
.

Advertisement

Table of Contents
loading

Table of Contents