Casio PF-8000 Operation Manual page 9

•Special operation keys (Keys below the display window)
T=3 Finger/Touch mode key
• Finger mode ( a mark appears) — 48 types of characters (alphabot, iiiiiniiniK ;md
symbols) can be input by finger writing using the Input Screen.
There are many kinds of writing forms in the world.
This unit recognizes only standard alpha-numeric characters written in tho (onns
shown on page 21.
• Touch mode ( a mark disappears) — Numerical and arithemetic operation keys on
the Input Screen can be input.
(Symbolized here as ED ).
"a" Data input/output mode key
• Press this key for data storage, no will be displayed and data can be input . This key
is also pressed with performing data correction or deletion. (Page 35, 36)
• If this key is pressed while ra is displayed, na will disappear and the output mode
will be designated.
(Symbolized here as S ).
e=i Display clear key
• Press this key to clear the display.
• This key is also pressed when deleting data. (Page-36, 42)
• After this key has been pressed, arithmetic operation key input will be displayed as
, c symbols. (Page 27)
a , a Cursor keys
• Press these keys when the cursor position is to be shifted. When one of these keys is
pressed once, a shift of one display location results. If it remains depressed, the shift is
automatically repeated.
a Delete key
• Press to delete one character to the left of the blinking cursor. (Page 28)
'•"-'" Command key
• Each time this key is pressed, five commands are displayed.
• When the desired command is displayed, press the o key and the command will be
executed. (Page 46)
• In the input mode, after "BUZZER ON(OFF)" is displayed "AUTO INPUT^"and
"AUTO INPUTV are displayed but these commands can't be executed.
(Symbolized here as H .)
B Execute key
• This key is used to execute the command specified using the & key. (Page 46)
crbTEL input/output key
• Press this key to input/output telephone numbers, etc. (Page 26)
16