Error Messages - Pioneer AVH-P7650DVD Operation Manual

Appendix
Additional Information
Symptom
Switching the viewing angle is
not possible.
The picture is extremely unclear/
distorted and dark during play-
back.
Problems during Video CD playback
Symptom
The PBC (playback control)
menu display cannot be called
up.
Repeat play and track/time
search are not possible.

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error
message.
Message
ERROR-02
ERROR-05
DIFFERENT REGION DISC (RE-
GION ERR)
NON PLAYABLE DISC (NON-
PLAY)
THERMAL PROTECTION IN
MOTION (TEMP)
92
En
Cause
The DVD playing does not feature
scenes shot from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
The disc features a signal to prohibit
copying. (Some discs may have
this.)
Cause
The Video CD playing does not fea-
ture PBC.
PBC is turned off.
PBC is turned on.
Cause
Dirty disc
Scratched disc
Electrical or mechanical
The disc does not have the same re-
gion number as this unit
This type of disc cannot be played
by this unit
The disc is loaded upside down
The temperature of this unit is out-
side the normal operating range
Action (See)
You cannot switch between multiple angles if
the DVD does not feature scenes recorded
from multiple angles.
Switch between multiple angles when watch-
ing scenes recorded from multiple angles.
Since this unit is compatible with the copy
guard analog copy protect system, when play-
ing a disc that has a signal prohibiting copy-
ing, the picture may suffer from horizontal
stripes or other imperfections when viewed
on some displays. This does not mean this
unit is malfunctioning.
Action (See)
This operation is not possible with Video CDs
not featuring PBC.
Turn PBC on. (Page 41, Page 45)
Turn PBC off. (Page 41, Page 45)
Action (See)
Clean disc.
Replace disc.
Press RESET.
Replace the DVD video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Check that the disc is loaded correctly.
Wait until the units temperature returns to
within normal operating limits.