CDA FW422 Manual For Installation, Use And Maintenance page 8

Installation
Installation into the furniture:
1. Carefully lift the refrigerator into the furniture aperture, taking care not
to damage the cabinet edges. The front edge of the feet should be in line
with the front edge of the cabinet.
2. Align the refrigerator so that the gasket sealing strip is close to the
non-hinge side of the unit and secure the refrigerator in position using
two screws, one through each foot.
3. Screw the top support bracket to the underside of the top shelf using
three screws (supplied)
4. Fit the slider brackets to the refrigerator door using two screws, as shown
in the image below:
5. Next, mark and fix into position the slider guides on the fascia door.
The sliders should be located 20 – 22mm from the edge of the door
as shown. Secure in position after fitting the sliders into the slider
brackets using two screws, taking care to ensure that the screws will not
pierce all the way through the fascia (heavily rebated doors). See fig 5.
8
20 mm
x2
fig. 4
x2
fig. 5