Operating Range Of The Remote Control - Pioneer VSX-C301 Operating Instructions Manual

Audio video multi-channel receiver
Hide thumbs Also See for VSX-C301:
Table of Contents

Advertisement

04
Controls and displays
SOUND MODE
Use to select a SOUND MODE for the current
source.
DIALOG
Press to switch on/off DIALOG (dialog
enhancement).
10 MUTE
Press to mute all output. Press again (or adjust the
volume using the MASTER VOLUME control) to restore
the sound.
11 SIGNAL SELECT (page 27)
Use to select the analog (ANA) or digital (DIG)signal for
the DVD, TV/SAT, DVR/VCR and FRONT inputs.
12 MASTER VOLUME
Use to adjust the volume.
13 ROOM SETUP (page 21)
Use to select a preset room setup.
14 SYSTEM SETUP (page 29)
Press to access the SYSTEM SETUP menu to make
detailed receiver settings.
15 Cursor keys and ENTER
Use to navigate menus and select options/execute
commands.
16 VIRTUAL SB (page 24)
Press to switch on/off the virtual surround back mode.
17 DIMMER
Press DIMMER repeatedly to change the brightness/
switch off the front panel display. The display will light
brightly for about two seconds when you operate the
receiver with the display off or dimmed. (Note that the
master volume indicator always remains lit, even when
the rest of the display is off.)
18 Playback controls (page 34)
Playback controls for external components, such as DVD
and CD players.
Functions printed in blue control the built-in tuner; other
functions control other external equipment.
19 Number buttons (page 34)
Use for numerical input of track numbers, radio
frequencies, and so on.
20 CHANNEL +/– (page 34)
Use to change channels on a satellite receiver, cable box,
VCR or DVR.
21 TV CONTROL buttons (page 32)
Use to control your TV (after setting up the remote control
to work with your TV).
20
En

Operating range of the remote control

The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
30
30
7m

Advertisement

Table of Contents
loading

Table of Contents